CAD文件 
The regional characteristics of temperature, diet, and clothing are common, yet cutting tools still exhibit regional traits. The regional characteristics of the cutting tool industry, including alloy milling cutters, alloy drill bits, and non-standard tools, are particularly evident.
The development of the cutting tool industry in Wenling has spanned more than thirty years. Since the reform and opening up, this pillar industry has not only achieved sustainable development but also comprehensive expansion. Compared to the initially produced simple products such as drill bits and taps, the products manufactured by Wenling's cutting tool enterprises now cover almost all categories of cutting tools: tools for processing various external surfaces, including turning tools, milling cutters, and files; hole processing tools, including drill bits, reamers, reamers, and internal and external surface broaches; gear processing tools, including hob cutters, gear shapers, and bevel gear processing tools; thread processing tools, including taps, automatic opening and closing thread cutting heads, thread turning tools, and thread milling cutters; cutting-off tools, including tipped circular saw blades, cutoff turning tools, and saw blade milling cutters; in addition, there are also combination tools.
The development of cutting tool materials plays a decisive role in the advancement of cutting technology. This article introduces the performance and applicable scope of cutting tool materials used in cutting, such as diamond, polycrystalline cubic boron nitride, ceramics, cemented carbide, and high-speed steel. The mechanism of tool damage is the theoretical basis for the reasonable selection of tool materials. The proper matching of the performance between tool materials and workpiece materials is the key criterion for selecting cutting tool materials. Tool materials should be chosen based on the mechanical, physical, and chemical properties of both the tool and workpiece materials to achieve good cutting results. The selection of tool materials for pistons during cutting processing is also discussed.
Economy is one of the important indicators of cutting tool materials. Although high-quality tool materials have a high cost per individual tool, their long service life means the cost allocated to each part may not be high. Therefore, when selecting materials for end mills, their economic effect should be comprehensively considered.
Although cutting tools exhibit quite obvious regional characteristics, their development status is also vigorous and distinctive.
Related News
Manufacture PCD engraving tool tungsten steel round bar, tungsten carbide round bar, YL10.2 precision ground bar
Features excellent hot hardness, good wear resistance, high elastic modulus, high flexural strength, good chemical stability (resistant to acid, alkali, and high-temperature oxidation), good impact toughness, low expansion coefficient, and thermal and electrical conductivity similar to iron and its alloys.
High-precision mechanical parts processing, tungsten carbide non-standard wear-resistant parts, custom-made according to drawings
Regional differences in temperature, diet, and clothing are common, yet knives still exhibit regional characteristics. The regional traits of the cutting tool industry, including alloy milling cutters, alloy drill bits, and non-standard tools, are particularly pronounced.
Contact Information
Phone: +86-027-87180391
Fax: 027-87925146
Email:Reetec@reetec.com.cn
Address: No. 5, Huagongyuan 1st Road, East Lake High-tech Development Zone, Wuhan
Official QR Code
This website supports IPV6